Click here to download Low Installation Cost Fasteners PDF

Enquire About Duo-Taptite® Now

Duo-Taptite®

Duo-Taptite® has a stabilising, threaded dog point which ensures better starting ability. Its self-aligning characteristic combined with an easy pick-up requires minimal starting end load.

This reduces operator fatigue, elminates interuptions in production and adds speed to every fastening operation.

The lower starting end pressure combines with lower driving torque to reduce time and power costs right down the line.

The higher, more uniform, strip-to-drive torque ratio provides a built-in safety factor against over-driving. This reduces operating costs by eliminating broken screws, damaged mating threads and inferior fastenings.

SELECTION GUIDE
Applications		Recommended Fastener
Duo - Taptite® For use with all ductile metals, for dia castings and punch extruded metals.
Product Range		How to Use
Part No	Description	Recommended Hole Size	Drive Torque	Drive Tool
301-0004	M6 x 28mm Hex Hd/Washer	5.5mm	6 Nm	8mm Hex Socket
211-0010	M8 x 30 mm Hex Hd/Washer	7.3 mm	12 Nm	13 mm Hex Socket
211-0018	M6 x 13 mm FL-U/Cut Pozi Duo	5.5 mm	6 Nm	#3 Pozi Drive
211-0060	3/8 – 16 x 1.125 mm Hex Hd/Washer	8.8 mm	40 Nm	14 mm Hex Socket
211-0086	M8 x 12 mm Hex Hd/Washer	7.3 mm	12 Nm	10 mm Hex Socket
211-0097	M6 x 16 mm Pan Hd/Cross Recess	5.5 mm	6 Nm	#3 Phillips bit
211-0101	M6 x 10 mm Pan Hd/Cross Recess	5.5 mm	6 Nm	#3 Phillips bit