 |
Step 1
Insert Poly Zips® into 5/16 socket and carefully position screw in centre of sheet crest to prevent any skidding or scratching.
|
 |
Step 2
Using a variable speed screw gun, start drilling slowly keeping screw straight to give you the correct oversized hole in your polycarbonate material.
|
 |
Step 3
Keep driving screw until it engages into the batten and EPDM washer sits securely. Do not over tighten screw, as it may cause failure.
Poly Zips® is suitable for fixing into both timber and thin metal battens up to 1mm thick.
Some hardwoods may require pre-drilling. |
| Always check with material supplier recommendations for number of fasteners and spacing’s required. |
