HOME | LINKS | CONTACTS
 
 
Roofing & cladding » 0.60 Corodek® Support Spacings
 

Curving Quality
| Benefits | Support Spacings | Curving Styles
Sprung Curved | Factory Pre-formed | Curving Details |
Installation Hints
Colours & Finishes | Technical Specs | Product Checklist

Click here to download 0.60 CORODEK® PDF

Click here to download 0.60 CORODEK® Technical Specs PDF

Enquire About 0.60 CORODEK® Now

Support Spacings

For typical Bullnose verandahs in non-traffic applications the maximum allowable span is 1800mm. The overlapping sheets need to be secured at the midspan with either a heavy-duty pop rivet or stitching screw.

The minimum recommended roof pitch for 0.60 curving quality CORODEK® is 5° (1 in 12). For roofs with end laps the minimum lap is 200mm for pitches between 5° - 15° and 150mm for roof above 15°. For walls allow maximum end laps of 100mm.

 

 
   
  SITE SEARCH
 
FIND A DISTRIBUTOR  
 
   
   
 
FIND A
PROFESSION/TRADE
 
 
   
   
 

NEWS
Metroll Product Guide