| |
|
|
|
Click
here to download CORODEK® PDF
Click
here to download CORODEK® Technical Specs PDF
Enquire
About CORODEK® Now
Location of Fasteners at Supports
CORODEK® may be fastened to timber or steel supports by conventional crest fixing. There should be 5 fixings per sheet at end and end laps for normal conditions and 3 fixings per sheet at intermediate supports. For severe exposure conditions, higher wind pressures can be withstood by use of 5 fixings per sheet at intermediate supports.
Fixing Fastener Location
Softwood
Roofing: M6 -11 x 50mm Roof Zips®, Hex Head with seal.
Cladding: M6 -11 x 25mm Roof Zips®, Hex Head with seal.
Hardwood
Roofing: M6 -11 x 50mm Roof Zips®, Hex Head with seal.
Cladding: M6 -11 x 25mm Roof Zips®, Hex Head with seal.
Steel Supports
Metal purlins and battens to a maximum of 3.2mm with M6 x 50mm Roof Zip®.
|
|
|
 |
 |
|
|
|
|
|
|
|
|
|
|
NEWS |
|
|
|
