| |
|
|
|
| Click
here to download Curves & Contours PDF
Enquire
About Curves & Contours Now
Sometimes called “machine rolled” roofing,
factory pre-formed roofing is necessary for convex and
concave curves which are tighter than what can be achieved
with sprung curving.
The factory pre-forming process involves passing individual
sheets through a set of curving rollers several times,
adjusting the rollers with each pass to tighten the
radius until the desired curves achieved.
This process allows the creation of very tight cures
as required by bullnose verandahs and cranked ridging.
Using this process even a full circle can be created.
Please contact us for the potential of factory preformed
curved roofing.
COLORBOND® and ZINCALUME® are registered trademarks
of BlueScope Steel Limited. |
|
|
 |
 |
| |
|
|
|
|
