| |
|
|
|
Click
here to download Metroclad® 850 PDF
Click
here to download Metroclad® 850 Installation Hints
PDF
Enquire About Metroclad® 850 Now
Length
Metroll can supply Metroclad® 850 COLORBOND®
or ZINCALUME® sheeting up to a maximum length of
6 metres. Longer lengths may be possible to be supplied,
subject to arrangement with your local Metroll office.
Lengths ordered to be manufactured need to be site measurements,
not those taken off plans. Length tolerance on Metroclad®
850 is ± 10mm. Width tolerance on Metroclad®
850 is ± 5mm.
Handling of Material
When handling Metroclad® 850 care should be taken
at all times to preserve the quality of the finish.
Packs should be kept dry and stored above ground level
whilst on site. If however the sheets do become wet
they should be separated, wiped and placed in the open
to dry.
Cutting
Metroclad® 850 wall cladding can be cut where necessary
by using a circular saw with a metal cutting blade,
not an abrasive disc, power shears or nibblers are also
suitable. When you cut COLORBOND® sheeting ensure
the coloured surface is placed downwards to lessen the
likelihood of swarf (hot metal filings) being embedded
in the exposed surface.
Cleanup
Prior to departing the work site each day please take
care to remove all foreign debris, screws, rivets and
especially any swarf from drilling or cutting from the
roof surface or from inside the gutters. Failure to
do this may result in premature corrosion of the roof
or gutter system.
Compatibility
Never use lead flashings with ZINCALUME® or COLORBOND®
Metroclad® 850 wall cladding.
Other Materials
Metroclad® 850 wall cladding can be roll formed
to order in Galvanised, ZINCALUME® or the standard
range of 12 COLORBOND® colours. Some branches may
keep more than the standard 12 colours in the range.
Please enquire at your local branch as to lead time
and availability.
Harsh Environments
If you intend to use Metroclad® 850 wall cladding
within 1km of Industrial, Salt marine or unusually corrosive
environments please do not hesitate to contact us for
advice on the right product to use.
Suggested Specification
All wall cladding as shown on the drawings shall be
Metroclad® 850 as manufactured by Metroll Pty Ltd.
It needs to be fixed in a workmanlike manner and in
accordance with the manufacturer’s recommendations.
Base sheet steel shall be G300, AZ150 with specified
finish.
Availability & Delivery
Metroclad® 850 is available direct from Metroll
or their distributors. Prompt and efficient delivery
is assured. Please contact your local Metroll office
or distributor for the relevant delivery days to your
area. You can help us to supply you with material in
good order by ensuring that you have made suitable arrangements
to have our trucks unloaded. To prevent damage when
lifting long lengths of sheeting by crane, please take
care to ensure that the load is spread. Where a crane
cannot by made available it is the customer’s
responsibility to provide sufficient labour to assist
the driver in unloading.
COLORBOND® and ZINCALUME® are registered trademarks
of Bluescope Steel Ltd.
|
|
|
 |
 |
| |
|
|
|
|
