Fasteners » TRANSLUCENT SHEETING - FIBREGLASS teks®

Fibreglass Teks®

Hex. Head with 32mm Weather-Lok 2 Washer

Application

For fixing fibreglass sheeting to sheet purlins.

• Predrills its own expansion hole.
  
• Save up to 50% installation time!
  
• New Teks® drill point for fast and easy fastening into steel purlins from 1.2mm to 5mm thick (2.4mm lapped battens).
  
• Patent pending wing design drills an over sized hole into the fibreglass material.
• New Weather-Lok 2 washer - improves outdoor performances and ability to withstand higher temperatures and harsher environments.
  

Online Fastener Enquiry Call Metroll Newcastle

Step 1

Insert Fibreglass-Teks® into 5/16 socket and firmly position screw in centre of sheet crest* to prevent any skidding or scratching.

* Suitable for roofing profile heights 18mm to 29mm (M6.5x65mm) & 40mm to 62.5mm (M6.5x85mm)

Step 2

Using a variable speed screw gun, start drilling slowly keeping screw straight to give you the correct oversized hole in your fibreglass material.

Step 3

Keep driving screw until it engages into steel purlin* and Weatherlok® washer sits securely.
Do not over tighten screw.

*Suitable for purlins 1.2mm to 5.0mm thick

Always check with material supplier recommendations for number of fasteners and spacing’s required.

Accesssories

Weather-Lok 2 Washer