Structural Products PDF
Z Section Purlins are generally manufactured from
GALVASPAN® steel and are roll formed into Z Section.
Metroll Z Section Purlins have one broad and one narrow flange. These are designed to fit neatly and are used for lapping at the internal supports producing structurally continuous lines of purlins for the length of the building.
Structural continuity results in improved rigidity, but
lapping doubles the thickness of the purlin over the
supports where the bending movement is the greatest.
This saves 30-50% of steel in purlins relative to C Section Purlins.
When additional purlin strength is needed Z Section
Purlins of the same depth but greater thickness can be
lapped as needed. Structural applications include grain or coal handling facilities and manufacturing facilities.
Links to Purlin Specification Tables
here for Single Span Specification Tables
here for Double Span Specification Tables
here for Double Lapped Specification Tables
here for Three Span Specification Tables
here for Four Span Specification Tables
here for Four Lapped Span Specification Tables
Online Enquiry Call Metroll Newcastle